• VT-447C Laminate/Prepreg

    UL Approval: E214381 Version: 31/08/2024 31/08/2024 /127/128/130

    General Information

    • Phenolic Cured System
    • Halogen Free & High Tg
    • FR15.1 & MOT 150˚C
    • CTI 600V
    • UV Blocking
    • High Voltage CAF Resistance
    • Low Z-CTE
    • Excellent Thermal Reliability

    Application

    PEV & HEV Automotive, BAPV, Instrumentation, Communication Equipment, Electronic Game Machine, White Goods, etc.

    Availability

    • Core Thickness: 0.004” (0.10mm) to .200” (5mm), available in sheet or panel form
    • Copper Foil: 1/2oz to 6oz
    • Prepregs are available in roll or panel form
    • E-Glass styles: 7628, 2116, 1080

    Storage Condition

    Properties Prepreg Laminate
    Storage Condition Temperature Below 23˚C (73˚F) Below 5˚C (41˚F) Room
    Relative Humidity Below 55% RH / /

    Properties

    Properties Test Method Units Specification Typical Value
    Thermal Properties
    Tg IPC-TM-650 2.4.25 °C 170 min 175
    Td ASTM D3850 °C 340 385
    T260 IPC-TM-650 2.4.24.1 Minute 30 minimum >60
    T288 IPC-TM-650 2.4.24.1 Minute 15 minimum >20
    Thermal Stress @ 288°C IPC-TM-650 2.4.13.1 Second Pass 10s >200
    Z-axis CTE Before Tg IPC-TM-650 2.4.24 ppm/°C 60 maximum 35
    After Tg ppm/°C 300 maximum 190
    Total Expansion (50~260°C) % 3.5 maximum 2.2
    MOT UL 746E °C - 150
    Electrical Properties
    Dk @ 1GHz IPC-TM-650 2.5.5.9 - 5.4 maximum 4.6
    Df @ 1GHz IPC-TM-650 2.5.5.9 - 0.035 maximum 0.011
    Volume Resistivity After Moisture Resistance IPC-TM-650 2.5.17.1 MΩ-cm 1.0E+6 minimum 5.0E+8
    E-24/125 1.0E+3 minimum 5.0E+6
    Surface Resistivity After Moisture Resistance IPC-TM-650 2.5.17.1 MΩ 1.0E+4 minimum 5.0E+7
    E-24/125 1.0E+3 minimum 5.0E+6
    Electrical Strength IPC-TM-650 2.5.6.2 Volt/mil (KV/mm) 762 (30) minimum 1200~1400 (54)
    Dielectric Breakdown IPC-TM-650 2.5.6 KV 40 minimum 60
    Comparative Tracking Index (CTI) ASTM D3638 Rating (Volt) - Grade 0 (>600)
    Arc Resistance ASTM D495 Second - 187
    Mechanical Properties
    Peel Strength (1oz) As received IPC-TM-650 2.4.8 lb/in (N/mm) - 8 (1.4)
    After thermal stress 6 (1.05) minimum 8 (1.4)
    Flexural Strength Warp IPC-TM-650 2.4.4 KPsi (MPa) 60 (415) minimum 72 (500)
    Fill 50 (345) minimum 58 (400)
    Physical Properties
    Moisture Absorption IPC-TM-650 2.6.2.1 % 0.80 maximum 0.18
    Flammability UL-94 Rating V-0 minimum V-0

    All test data provided are typical and not intended to be specification values. Disclaimer: The information and data contained in this technical literature is based on data and knowledge correct at the time of publishing/printing and is believed to be accurate and is offered in good faith for the benefit of the user. The user should make his own tests to verify the suitability of this product for any application before its use. All data are typical values only and subject to change without notice.

    Download TDS Datasheet