• VT-4B5L Metal Base Laminate

    UL Approval: E214381 Version: 23/08/2023 23/08/2023

    General Information

    Ventec offers thermally conductive dielectric without glass reinforcement which offers the following features:

    • Thermal conductivity -- 3.6W/mK
    • Ceramic Filled
    • Halogen Free
    • Flammability UL94 V-0
    • Solder Joint Crack Solution


    • High Beam & Low Beam
    • 3D Lighting
    • Power Conversion
    • Motor Drives & Controllers
    • Power Supply

    Laminate Properties

    Item Test Method (IPC-TM-650) or as noted Unit Dielectric Thickness
    50μm 100μm
    Thermal Conductivity ISO22007-2 W/m*K 3.6
    Thermal Impedance ISO22007-2 ℃*in2/W 0.022 0.034
    Tg DSC 2.4.25 100
    DMA 95
    Td TGA ASTM D3850 380
    Elastic Modulus 30℃ Gpa 0.5
    125℃ 0.2
    Thermal Stress Solder Dip @ 288℃ Minute >=5
    Hi-Pot Proof Test DC V >600
    Breakdown Voltage AC V 4000 8000
    Dk @ 1MHz C-24 / 23 / 50 - 4.8
    Df @ 1MHz C-24 / 23 / 50 - 0.016
    Volume Resistance After Moisture MΩ-cm 5.0E+8
    E-24/125 3.0E+7
    Surface Resistance After Moisture 2.0E+7
    E-24/125 5.0E+6
    Peel Strength (1oz Cu) As Received 2.4.8 Lb/in 5
    CTI As Received ASTM D3638 V 600
    Flammability As Received UL 94 Rating V-0
    RTI Electric UL 746E 155
    Mechanical 155

    Remark: (1) All test data provided are typical values and not intended to be specification values. (2) Hi-Pot proof test (600VDC) is performed 100% on the whole working panels (with copper foil). Any higher requirement of Hi-Pot test can be AABUS. (3) Breakdown test is a destructive test, which is done on substrate (without copper foil) of a random sample in the FQC laboratory. Disclaimer: The information and data contained in this technical literature is based on data and knowledge correct at the time of publishing/printing and is believed to be accurate and is offered in good faith for the benefit of the user. The user should make his own tests to verify the suitability of this product for any application before its use. All data are typical values only and subject to change without notice.

    Storage Condition

    Storage Condition Temperature Room
    Relative Humidity /

    Designation of IMS Laminate




    Item Availability
    Dielectric Thickness .002" (50μm), .004" (100μm)
    Standard Size Imperial (inch) 18.11”*24.02”, 20.08”*24.02”, 20.98”*24.02”
    Metric (mm) 460mm*610mm, 510mm*610mm, 533mm*610mm
    Copper Foil 1oz, 2oz, 3oz

    Remark: Additional options could be available upon request.

    Protective Film for Metal Plate

    Type Material Max Operation Temperature
    Standard Type PET 170℃
    High Temperature Type Polyimide 270℃

    Download TDS Datasheet