• tec-speed 20.0 VT-870 H1000 Hydrocarbon Ceramic based Laminate

    UL Approval: E214381 Version: 22/11/2023

    General Information

    • Hi-Tg ceramic filled hydrocarbon laminate
    • High Dk (10.2) and Low Df (0.003)
    • Excellent thermal reliability

    Application

    • Cellular base station antennas and power amplifiers
    • Patch antennas
    • LNB (Low Noise Block) for broadcast satellites
    • RF Identification Tags (RFID)

    Availability
    Core Thickness 0.020”, 0.025”, 0.050” and 0.100”

    * Additional copper types are available upon request.

    Default Copper Type Copper Thickness Remark
    HTE Hoz, 1oz and 2oz
    HVLP Hoz and 1oz PIM Sensitive Application & Lower insertion loss application

    Storage Condition

    Properties Laminate
    Storage Condition Temperature Room
    Relative Humidity /

    Disclaimer: > The information and data contained in this technical literature is based on data and knowledge correct at the time of publishing/printing and is believed to be accurate and is offered in good faith for the benefit of the user. The user should make his own tests to verify the suitability of this product for any application before its use. All data are typical values only and subject to change without notice.

    Laminate Properties

    Properties Test Method Units Typical Value
    Thermal Properties
    Tg TMA IPC-TM-650 2.4.24 Clamped Stripline °C 280
    Td ASTM D3850 °C 410
    T288 IPC-TM-650 2.4.24.1 Minute >120
    X Y-CTE 50~140°C IPC-TM-650 2.4.24 ppm/°C 8, 9
    Z-CTE 50~140°C IPC-TM-650 2.4.24 ppm/°C 31
    Thermal Stress @ 288°C IPC-TM-650 2.4.13.1 Second >600
    Thermal Conductivity ASTM D5470 W/mK 0.85
    Electrical Properties
    Dielectric Constant @ 10GHz IPC-TM-650 2.5.5.5 Clamped Stripline - 10.2 ± 0.25
    Design Dk 8~40GHz Differential phase length method - 10.7
    TCDk After Moisture Resistance IPC-TM-650 2.5.5.5 Clamped Stripline ppm/°C +50
    Dissipation Factor @ 10GHz IPC-TM-650 2.5.5.13 Clamped Stripline - 0.003
    PIM dBc -160
    Mechanical Properties
    Peel Strength (1oz) As received IPC-TM-650 2.4.8 lb/in (N/mm) 5.0 (0.88)
    After thermal stress IPC-TM-650 2.4.8 lb/in (N/mm) 5.0 (0.88)
    Physical Properties
    Flammability UL-94 Rating V-0

    All test data provided are typical and not intended to be specification values.

    Download TDS Datasheet