To Download Datasheets Select Below and Click Download
tec-speed 20.0 VTM1000i Hydrocarbon Ceramic based LaminateUL Approval: E214381 Version: Prelim 1 13/12/2022
- Hydrocarbon & ceramic based laminate
- High Dk (9.8) and Low Df (0.0023)
- Excellent thermal reliability
- Satellite Communication Systems
- Power Amplifiers
- Global Positioning System Antennas
- Filters and Couplers
- RF and Microwave Circuitry
Core Thickness 0.015”, 0.020”, 0.025”, 0.030”, 0.050”, 0.060”, 0.075”, 0.100”, 0.125”, and 0.150”
* Additional copper types are available upon request.
> Copper base or aluminum base laminate is available.
> The information and data contained in this technical literature is based on data and knowledge correct at the time of publishing/printing and is believed to be accurate and is offered in good faith for the benefit of the user. The user should make his own tests to verify the suitability of this product for any application before its use. All data are typical values only and subject to change without notice.
Default Copper Type Copper Thickness HVLP Hoz and 1oz HTE 2oz
Properties Laminate Storage Condition Temperature Room Relative Humidity /
Properties Test Method Units Typical Value Electrical Properties Dielectric Constant @ 10GHz IPC-TM-650 22.214.171.124 Clamped Stripline - 9.8 ± 0.245 Design Dk 8~40GHz Differential phase length method - 9.9 Dissipation Factor @ 10GHz IPC-TM-650 126.96.36.199 - 0.0023 TcDK After Moisture Resistance IPC-TM-650 188.8.131.52 Clamped Stripline ppm/°C -40 Thermal Properties Td ASTM D3850 °C 426 Z-CTE 50~140˚C IPC-TM-650 2.4.24 ppm/°C 25 x, y-CTE 50~140˚C IPC-TM-650 2.4.24 ppm/°C 24 Thermal Stress @ 288°C IPC-TM-650 184.108.40.206 Second >600 Thermal Conductivity ASTM D5470 W/mK 1.00 Mechanical Properties Peel Strength (1oz) As received IPC-TM-650 2.4.8 lb/in (N/mm) 5.0 (0.88) After thermal stress IPC-TM-650 2.4.8 lb/in (N/mm) 5.0 (0.88) Flexural Modulus ASTM D790 Mpsi 2.05 Physical Properties Moisture Absorption ASTM D547 % 0.15 Lead free process compatible - - YES
All test data provided are typical and not intended to be specification values.