To Download Datasheets Select Below and Click Download
VT-901PP 106HW-75/106HW-80 VT-47PP 1080VF-68/106VF-76UL Approval: E214381 Version: B4 29/12/2017
General InformationVT-901PP HW type is a high performance ceramic-filled polyimide prepreg, designed for use in filling etched areas in polyimide multilayers that contain thick copper layers and for filling clearance holes in metal cores. The filler in the resin serves to reduce shrinkage and inhibit crack formation during through-hole drilling in filled clearance areas. VT-47PP VF type is a high Tg, lead free compatible and ceramic-filled prepreg, designed for application in filling clearance holes or via holes. The ceramic is filled to minimize resin shrinking and cracking in filled clearance holes.
- Chip Manufacturers
- Engine/Flight Controls
- Power Supply/Backplane
- Military and Burn-in board
- Automotive under-hood
- BGA Package
- High layer
- Mother board/Backplane
Storage Condition & Shelf Life
Prepreg Storage Condition Temperature < 23℃ (73℉) < 5℃ (41℉) Relative Humidity < 55% / Shelf Life 3 Months 6 Months
The prepreg exceeding shelf life should be retested.
Product Part # Glass Fabric Resin Content Resin Flow Pressed Thickness Equivalent VT-901PP 106HW-75 106 75% 45% 2.5mil 84N0675-HF 106HW-80 106 80% 50% 3.1mil 84N0680-HF VT-47PP 1080VF-68 1080 68% 45% 3.3mil / 106VF-76 106 76% 50% 2.5mil /
Pressed thickness is measured by micrometer after lamination.
Property sheet (Test sample information - 2 ply construction)
Test Item Test Condition Unit VT-47PP VT-901PP Tg DSC 2.4.25 °C 180 250 Td TGA ASTM D3850 °C 355 390 Electric Strength 18.104.22.168 KV/mm 54 54 Peel Strength (1oz) As Received 2.4.8 Lb/in 7.5-10 6-9 After Heated 7.5-10 6-9 Moisture Absorption D-24/23 2.6.21 % 0.10 0.20 After PCT 1atm.,121˚C,1 hour 0.12 0.22 Z-axis CTE (RC75%) Before Tg 2.4.24 PPM/°C 55 50 After Tg 300 240 50-260˚C % 3.5% 3.2% X-Y CTE IPC-TM-650 2.4.24 PPM/°C - 12~15 Thermal Stress Solder Dip 288˚C 22.214.171.124 Second >300 >300 Breakdown Voltage D-48/50+ D0.5-23 2.5.6 KV >60 >60 Arc Resistance D-48/50+ D0.5-23 ASTM D495 Second 147 150 DK @ 1MHz C-24/23/50 126.96.36.199 - 4.3 4.3 DF @ 1MHz C-24/23/50 188.8.131.52 - 0.018 0.016
All test data provided are typical values and not intended to be specification values.
Item VT-47PP VT-901PP Heat Rise of Material 3.0~5.0℃/min (5~10℉/min) 2.5~4.5℃/min (4.5~8℉/min) Cure Temperature >=185℃ >=218℃ Cure Time >60 minutes >200 minutes Vacuuming should be continues until over 140℃ (284℉) for material. Pressure: Start from 100psi, Full pressure should be 350psi or above. Cold Press: Water cooling at 100psi for more than 60 minutes.
Contact Ventec technical service to discuss the specific condition.